Digital Files - Arcane Sheriff - Valorant - STL Files

This is an STL file pack for 3d printing! These files create a replica prop with no firing capacity whatsoever. This model requires glue and hardware! Please do not use for commercial purposes. I will be updating this as feedback comes in. Please reach out and share your creations!

Watch the assembly video here: https://www.tiktok.com/@saidaprops/video/7110529572868967726?is_from_webapp=1&sender_device=pc&web_id=7099343163365869098

This is how it looks completed::https://www.tiktok.com/@saidaprops/video/7111458288994241834?is_from_webapp=1&sender_device=pc&web_id=7099343163365869098

This STL pack consists of 24 items which are split for ease of printing and painting.

Hardware required is,

2" dia x 4" long clear acrylic or polycarbonate tube (1/16" wall)

1/2" dia x .75" long clear acrylic or polycarbonate tube (1/16"wall)

1/8" - 5/32" dia x roughly 2" clear rod

4x Flat head screws 1/2" - 3/4" long (only if battery access is needed) M3 or 6/32 should work

Various 1/8" or m3 sized studs

Gaff tape (decorative for handle)