Digital Files - Jett's Dagger & Cosplay STL Pack

STL Files Only!!! This is a pack of STL Files to help you create a complete Jett cosplay with your 3d printer.

The pack consists of the following;
Jacket Accessory A
Belt Accessory A
Belt Accessory B
Belt Buckle please note this is a non-functional belt buckle
Jett’s Dagger Complete (Non-LED)
Jett’s Dagger A (Non-LED)
Jett’s Dagger B (Non-LED)
Jett’s Dagger 1 (LED Version)
Jett’s Dagger 2 (LED Version)
Jett’s Dagger 3 (LED Version)

Jacket Accessory A is intended to be sewn into Jett’s jacket at the shoulder area

Belt Accessory A is intended to be used to create the belt using 2” seatbelt style webbing or similar

Belt Accessory B is intended to be glued onto the surface of Jett’s belt

Belt Buckle is a non functional buckle. It is intended to be used with a velcro style belt (it is also sized for 2” webbing)

Jett’s Dagger Complete (Non-LED) is ready to print and meant to be sliced however you see fit. Depending on your printer’s capabilities it may require additional supports and/or using software such as meshmixer (free) to separate into smaller sections.

Jett’s Dagger A & B (Non-LED) are designed for resin printers. The STL includes small holes for 1/16” dia x ½” h dowel pins. After printing, the holes will need to be carefully drilled out using a 1/16” drill bit. Insert the dowel pins and glue the assembly together.
these parts are sized properly for any printer with at least 5” of height.

Jett’s Dagger 1, 2 & 3 (LED Version) are designed for resin printers using clear resin. (please note this is a complex build) Full instructions are included in the download. This requires specific LEDs, buttons and batteries.