Digital Files - Wunderkind Shorty - Valorant - STL Pack
This is an STL file pack for 3d printing! These files create a replica prop with no firing capacity whatsoever. Please do not use for commercial purposes. I will be updating this as feedback comes in. Please reach out and share your creations! (will repost on twitter)
Watch the assembly video here:
This is how it looks completed:
***This build is designed for 3d printing FDM, it requires paint, glue, and the following hardware
1x 1.75" 1/4 x 20 Threaded Rod/Stud
2x 1/4 x 20 Nuts
2x washers
1x 1/8" Rod, 3.5" long
1x Pen Spring (for trigger)
2x m3 or similar screws (decorative) 12 and 30 mm long (ish) for trigger guard
Assembly is very straight forward, parts are split up for ease of printing and hidden seams. The main hinge is held together by friction. Tighten the 1/4 x 20 nuts until the barrel stays closed when holding the handle.
Sticker files are included, I used these with Cricut Explore Air 2 print then cut on vinyl sticker paper some stickers overlap and you may want to trim them!
UPDATE 3.22.23 added Grip V2, Main Body V2, Switch V2 and Trigger Guard V2 which have updated holes for better attachment of switch 2 and the trigger guard.
This is not a physical product! These are digital files for 3d printing!!!